Up to 2.3kW, 10A, 1 phase, for mobile charging of hybrid and electric cars with Type 2 connection. Handy mobile EV charger that you can easily keep in the trunk so that you can charge anywhere when you're on the move, camping or in the summer house.
Communication from the MOBILITY DOCK to the vehicle takes place via a control device integrated in the charger, which sets the charging current up to a maximum of 10A and also monitors the charging process. Thus, a charging power up to a maximum of 2.3 kW is achieved, the setting is automatic. The device monitors the device temperature. If an increased temperature is detected at the power plug, the charger automatically regulates the charging power to prevent overheating. As a further protective function for the user, ground wire monitoring and the detection of DC and AC faults are included in the charger. Such DC and AC faults are detected and protected up to 6mA DC and 30mA AC. The MOBILITY DOCK is CE compliant and has been developed and tested in compliance with the IEC62752 equipment standard.
Features:
- The LAPP charger for simple, mobile charging via standard sockets (safety socket CEE 7/3, type E/F) is ideal for on the road or in the garage at home.
- The space-saving charging station for Mode 3 cables can easily be stored in the boot thanks to its compact design of 255 mm x 135 mm x 105 mm.
- EV emergency charger is oil-resistant and supports a charging power of up to 2,3 kW at a nominal voltage of 230 V, operating temperature is -25 °C to +45 °C
- The integrated lever releases the connected Type 2 cable after the charging process with just one simple movement.
- Fold-out torque support for bracing against the wall reduces the weight of the dock and cable on the connected outlet.
- The car charger is equipped with a convenient LED indicator lamp in the housing.
- The EV charger is particularly safe thanks to overcurrent and overvoltage protection as well as temperature monitoring in the mains plug and in the in-cable control box (ICCB).
- Note that the built-in ground wire monitoring (safety) requires that the charger is connected to ground. Therefore it must be connected to a Shuko or Pin-Earth socket.
Specifications:
- Connections:
- Connection, type: Safety plug hybrid (type E/F, CEE 7/7)
- Connection 2, type: Type 2 female socket
- Performance:
- Loading capacity up to: 2.3 kW
- Charging mode: Mode 2
- Max current capacity: 10A
- Rated voltage: 230 V (AC)
- Cable:
- General:
- Protection class: IP44
- Model designation: 5555925000
- Color: Black
- Special feature: Charge control
- Operating temperature: -25...45°C
- Dimensions / Weight:
- Width: 135 mm
- Height: 255 mm
- Depth: 65 mm
- Weight: 750 g
|