|
Suitable for data interface or network interface, hub, network card, network switch, modem, data communication, etc. The over-voltage protection of network system is protected from induced overvoltage, operating overvoltage and electrostatic discharge. Damage; multi-stage protection, large current capacity, low voltage limit, fast response time, low insertion loss, high transmission rate, etc.
Why use a surge protector? The destructive power of lightning is extremely large. It is not enough to rely solely on external lightning protection (lightning rods, etc.). Lightning waves directly or indirectly (through electromagnetic induction) can invade electrical passages and metal passages (such as power lines, signal lines, antenna feeders and metal pipes, etc.). The resulting lightning overvoltage and surge voltage can cause great harm to electronic, electrical equipment, and information network systems.
Specifications:
- Model: RJ45 network signal lightning arrester
- Protected object: Network signal
- Rated working voltage (Un): 5V
- Maximum continuous operating voltage (Uc): 7.8V
- Maximum discharge current Imax (8/20us): 10KA
- Impact limit voltage Up (10/700/ms): <20V
- Insertion loss: 0.1dB
- Response time: ~1ns
- Protection pin: 1/2/3/6
- Maximum transmission rate: 100MHz
- Connector form: RJ45
- Operating temperature: -40...85°C
- Operationg humidity 30...90%
- Shell protection rating: IP20
- Insulation resistance: >0.4 Mohm
- Near-end crosstalk: >60 dB (PASS)
- Max. Ethernet cable length: 100m
- Protection line: single way
|