DIP switch, Lav profil - 4 x ON-OFF, 50V 0,1A

Tekniske detaljer:

• Number of positions: 4
• Størrelse:
  • A: 11.10mm
  • B: 6.62mm
• Material og finish:
  • Base og cover: UL94-VO, PBT. PBT is glass-fibre reinforced
  • Actuator: UL94-VO, PBT. PBT is glass-fibre reinforced
  • Terminals: brass
  • Kontakt: copper alloy
  • Contact plating: 3 micro inches of gold over 50 micro inches of nickel
  • Terminal plating: 90/10 solder
• Electrical og mechanical specifications:
  • Contact rating (carry):
    • (a): 50Vdc 100mA in constant situation
    • (b): 24Vdc 50mA with make-and-break
  • Contact resistance (at strøm 100mA):
    • (a): initially maks. 30mohm
    • (b): 100mohm maks. after life test
  • Isolationsmodstand (at spænding 500Vdc): min. 1000Mohm between adjacent terminals
  • Kapacitet: 5pF between adjacent terminals
  • Dielectric breakdown spænding: 500Vdc / 1minute
  • Operationel temperatur: -40°C til +70°C, no failures
  • Shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microsek.
  • Vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular til each other. No mechanical damage eller intermittent change of switch setting during eller after testing
  • Markings: special side eller top markings are optional
• Packing:
  • All DIP switches are shipped in standard IC tubes with all poles in the 'off' position

  Også kendt som: Switches > Dip Switches > Low-profile Dip Switches