DIP switch - 9 x ON-OFF, 50V 0,1A

Tekniske detaljer:

• Number of switches: 9
• Længde: 23.86mm
• Mekanisk levetid: min. 10000 operations per switch
• Elektrisk levetid: min. 5000 operations per switch, 50mA/24Vdc
• Effekt:
  • Non-switching: 100mA, 50Vdc
  • Switching: 50mA, 24Vdc
• Circuit: single-pole single-throw
• Materials og finish:
  • Hus: UL94-VO, PBT. PBT is glass-fibre reinforced
  • Cover: UL94-VO, PBT. PBT is glass-fibre reinforced
  • Actuators: UL94-VO, PBT. PBT is glass-fibre reinforced
  • Terminals: phosphor bronze with 3 micro inches of gold plating over nickel
  • Top seal: polyester film
• Electrical og mechanical specifications:
  • Contact rating (carry):
    • (a): 50Vdc 100mA in constant situation
    • (b): 24Vdc 50mA with make-and-break
  • Contact resistance (at strøm 100mA):
    • (a): initially maks. 30mohm
    • (b): 100mohm maks. after life test
  • Isolationsmodstand (at spænding 500Vdc): min. 1000Mohm between adjacent terminals
  • Kapacitet: 5pF between adjacent terminals
  • Dielectric breakdown spænding: 500Vdc / 1minute
  • Operationel temperatur: -40°C til +70°C, no failures
  • Shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microsek.
  • Vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular til each other. No mechanical damage eller intermittent change of switch setting during eller after testing
  • Markings: special side eller top markings are optional
• Packing: Standard IC tubes with all poles in the 'off' position

Også kendt som: Switches > Dip Switches > Standard Dip Switches > Standard Dip Switches