|
With this SPI-Ethernet interface converter, you can expand for example your Arduino or your Raspberry Pi Pico with an Ethernet interface.
The integrated W5500 chip enables simple control via the SPI interface. Due to its great popularity, both in the maker and industrial sectors, there are already a large number of application examples and libraries to be found online.
To process the Ethernet packets, the chip has an integrated 32 kB memory buffer.
In addition, the module is highly integrable due to its design and size.
Specifications:
- Model: RJ45 Connector module with W5500 chip and status LED
- Special feature: Integrated full TCP/IP protocol, Wake Up after power failure
- Compatible with: Arduino, Raspberry Pi, etc.
- Flash storage: 32KB TX RX cache buffer
- Voltage supply: 3.3 V
- Working current: Min. 200 mA
- Logic level: 3.3 V (5 V tolerant)
- SPI clock frequency: Up to 80 MHz
- Transmission rate: 10/100 MBps
- Ethernet standard: 10 BaseT /100BaseTX
- Supported TCP/IP protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Operating temperature: -25 to 70 °C
- Dimensions: 23 x 29 x 24 mm
|