Arduino™ - Arduino MKR1000 WIFI

Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.

Features:

• Full-Speed USB Device and embedded Host
• SAMD21 Cortex-M0+ 32bit low power ARM MCU
• WINC1500 low power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi
• ECC508 CryptoAuthentication

Specifications:

• Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
• Board Power Supply (USB/VIN): 5V
• Supported Battery: Li-Po single cell, 3.7V, 700mAh minimum
• Circuit Operating Voltage: 3.3V
• Digital I/O Pins: 8
• PWM Pins: 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
• UART: 1
• SPI: 1
• I2C: 1
• Analog Input Pins: 7 (ADC 8/10/12 bit)
• Analog Output Pins: 1 (DAC 10 bit)
• External Interrupts: 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
• DC Current per I/O Pin: 7 mA
• Flash Memory: 256 KB
• SRAM: 32 KB
• Clock Speed: 32.768 kHz (RTC), 48 MHz
• Length: 61.5 mm
• Width: 25 mm
• Weight: 32 gr.